New Circuits, Whole-Home Rewiring and Everything Behind the Walls
From a single dedicated circuit to a full rewire on an aging home, 4 Daughters Electric handles the wiring East Valley remodels, additions and backup-power projects depend on.
4 Daughters Electric handles residential wiring and rewiring across Gilbert and the East Valley — new and dedicated circuits, whole-home rewiring for aging or aluminum-branch homes, remodel and home-addition wiring, and generator hookups. We plan the runs, pull permits where required, and leave the work labeled and inspection-ready. Call (480) 896-0325.
The problem homeowners bring us
Wiring calls usually ride along with a bigger plan. A kitchen remodel needs more small-appliance circuits than the room has. An addition or casita needs its own feed. A older home keeps tripping and flickering because the branch wiring has aged past its comfortable life. Or a family that lost power one too many summers wants a generator wired in properly. In each case the wiring is invisible — but it's what decides whether the finished project works reliably or fights you for years.
Why wiring needs planning, not just pulling
Good wiring is mostly load math and routing done before anyone opens a wall. Every circuit has to be sized to its wire and its load, split so no single line is overtaxed, and protected by the right breaker — kitchens and baths especially, where code calls for dedicated and GFCI/AFCI-protected circuits. On older homes, the question is different: is the existing wiring simply full, or is it a material and vintage worth replacing wholesale? Aluminum branch wiring and cloth-insulated runs from earlier eras behave differently than modern copper, and pretending otherwise is how connections overheat later. Planning the runs, the panel capacity, and the device locations up front is what separates a clean job from a callback.
The wiring services grouped here
New circuits and general additions fall under electrical wiring, while replacing the aging branch wiring in an older home is home rewiring. When the wiring is part of a bigger build, our remodel electrician work covers kitchens and baths, and home addition electrical covers casitas, garages and room adds. For backup power, generator wiring ties a portable or standby unit into the home safely. If your service can't carry the new load, that starts with an electrical panel upgrade.
How a wiring project goes
Scope and load plan
We map what you're adding, size the circuits, and check whether the panel carries it.
Permit and rough-in
We pull the permit where required and run the cabling before walls close, coordinating with your other trades.
Devices and trim
Outlets, switches, fixtures and protection go in, labeled and to code.
Inspect and test
The work passes inspection and every circuit is verified under load.
What helps before you call
- A rough scope — remodel, addition, new circuit, rewire, or generator — and any plans or drawings.
- Your panel's main rating and how full it is.
- The home's approximate age, which hints at the existing wiring type.
- Timelines from your GC or other trades so we can sequence rough-in and trim.
Local detail: East Valley wiring realities
Gilbert's 1990s–2000s tracts are mostly modern copper wiring, so those projects are about capacity and added circuits more than replacement. Older Mesa and Apache Junction homes are where whole-home rewiring and aluminum-branch remediation come up. Remodel, addition and rewire work is permitted through the Town of Gilbert Development Services building division (or the relevant city's building department in Mesa, Chandler and beyond), and we handle that filing and inspection as part of the job.
Wiring & rewiring FAQs
Do I need a permit to add circuits or rewire?
New circuits, rewires, and remodel or addition wiring generally require a permit and inspection. We pull it through the Town of Gilbert (or your city) and schedule the inspection — it protects you at resale and keeps the work accountable.
Can you wire around a remodel done by my contractor?
Yes — we coordinate rough-in and trim with your GC and other trades. Getting us in before drywall closes is the difference between clean runs and cutting walls back open later.
How do I know if my home needs a full rewire?
Age and wiring type are the tells — aluminum branch wiring, cloth insulation, or persistent overheating and flicker across many circuits point toward rewiring. A single tired circuit doesn't; we assess before recommending the bigger job.
Will you need to open up my walls?
Sometimes, but we minimize it — fishing cable through existing cavities and using accessible routes where possible. On a full rewire we plan access points to limit patching, and we're upfront about where openings are unavoidable.
Can you add a circuit for an EV charger or shop?
Absolutely — dedicated circuits for EV charging, garages and shops are common requests. If the panel has room we run the circuit; if it's full, we'll flag whether an upgrade is needed first.
Wiring projects across Gilbert and the East Valley
Reviews and directions: 4 Daughters Electric Google Business Profile.
Planning a remodel, addition or rewire?
Bring us in early. We'll plan the circuits, handle the permit, and coordinate with your other trades so the wiring is one thing you don't have to worry about.
Call (480) 896-0325Discuss a Project